Tuscan Wall Sconces – Wall lights often take advantage of existing power lines to increase sconces in a room or area. Modern technology has created LED lights capable of operating for long periods of battery life. Battery wall mounts can be mount to any wall without drilling holes through the wall. Proper mounting require you to create small holes for the screws, which are easily patches if necessary with compound plaster. A wall lamp can be mounted in a matter of minutes. Locate the uprights on the wall with a stud locator.
More wall brackets use two screws to attach the mounting plate to the wall. Mark the location of the edges of the two adjacent beams. Place the mounting plate against the wall between the two posts. Mark the location of the holes. Rest one level above the mounting plate to make sure the tuscan wall sconces will level when installing. Press a Screw anchor against the mark on the wall and tap with a hammer to push through the wall. Some anchor bolts require drilling a 1/4-inch hole first. Use a 1/4 inch drill bit and drill to create the hole, if necessary.
12 Photos Gallery of: Tips Install Tuscan Wall Sconces
Remove the anchor bolt with a screwdriver. Repeat for the other holes in the mounting plate. Insert the screws through the holes and into the anchors with a screwdriver. Mounting the wall lamp on the mounting plate following the instructions included with the tuscan wall sconces fixture.